Intumescent mastic

The sealant that goes into joints and small gaps. Simple to apply, easy to get wrong.

  • Every seal labelled and photographed
  • BM TRADA / FIRAS-certificated contractors
  • Written price before any work
Get a price

We reply with a written price.

We use these details to reply to you. See our privacy notice.

Open the electric meter cupboard on a landing in a Hackney block and look at the back wall. Four or five meter tails go through it into the flat behind, each in its own drilled hole with a gap of 5 to 15mm round it. On the other side of that wall is someone's hallway. Gaps like those are what intumescent mastic is for: narrow, round a single cable or pipe, or along a joint where a partition meets a column.

A black cable dropping through a slot cut in the top of a painted wall under a concrete slab
A black cable dropping through a slot cut in the top of a painted wall under a concrete slab

Where it is not enough

A fist-sized hole with a dozen cables through it needs a batt, with mastic only round the edges. A 110mm plastic soil pipe needs a collar, whatever goes round it. The photo on this page shows a single black cable dropped through a slot in the top of a painted wall, which is mastic territory as long as the slot is within the joint width the product was tested for.

Depth

Each sealant's data sheet gives the joint widths it was tested in and the depth it has to fill, often with mineral wool packed in behind first. A thin bead smeared across the face of a 20mm gap can look tidy from the corridor and be 3mm deep. On our record the width and depth go down next to the product, for example: Seal 2-07, meter cupboard, 5 tails through 100mm block, gaps 8 to 12mm, intumescent mastic 25mm deep both faces, photo 2-07.

Mastic work is carried out by our BM TRADA / FIRAS-certificated contractors, usually as part of a wider fire stopping job.

Seen a hole round a pipe that should not be there?

Send a photo with a tape measure across it, the postcode and the type of building. We tell you what it needs and what it is likely to cost.

Call 020 4572 7457Get a quote